HES SMART Pac III Power Controller
The HES SMART Pac III is an inline power controller that provides filtered DC output, surge protection, and extends the HES warranty from 5 years to 10 years. It's recommended for critical installations requiring maximum reliability.
What does the SMART Pac III do?
The SMART Pac III conditions incoming power to eliminate electrical noise, transient spikes, and voltage fluctuations that can damage electric strikes. It converts and filters 12V or 24V DC input into clean power for the strike, while providing surge suppression and overload protection.
SMART Pac III Features
- Filtered DC output—Eliminates electrical noise
- Surge protection—Guards against transient spikes
- Overload protection—Prevents damage from current surges
- Diagnostic LED—Indicates power and fault status
- 10-year warranty—Doubles HES SecuriCare coverage
What are the SMART Pac III specifications?
The SMART Pac III accepts 12V or 24V DC input and provides regulated output for a single HES electric strike.
| Specification | Value |
|---|---|
| Input Voltage | 12 VDC or 24 VDC |
| Output Voltage | Matches input (filtered) |
| Output Current | Up to 1A continuous |
| Surge Protection | Built-in TVS diodes |
| Dimensions | Compact inline module |
| Warranty Extension | 5 years → 10 years |
When should I use the SMART Pac III?
Use the SMART Pac III for installations with power quality concerns, critical security applications, or when the extended 10-year warranty is beneficial.
| Application | SMART Pac III Recommended? |
|---|---|
| Older buildings with electrical noise | ✓ Yes |
| Industrial environments | ✓ Yes |
| Critical security applications | ✓ Yes |
| Locations with frequent surges | ✓ Yes |
| Budget-sensitive basic installations | Optional |
How does the warranty extension work?
When an HES electric strike is powered through a SMART Pac III, the SecuriCare warranty extends from 5 years to 10 years. This provides an additional 5 years of coverage for defects and failures. Registration with HES may be required.
For long-term installations, the SMART Pac III's warranty extension alone may justify its cost. An extra 5 years of coverage on a $300+ strike provides significant protection against replacement costs.
How do I install the SMART Pac III?
Install the SMART Pac III inline between the power source and the electric strike. Connect input from the access control panel or power supply, and connect output to the HES 9600 voltage pigtails.
Installation Steps
- Disconnect power from the circuit
- Connect power supply output to SMART Pac III input
- Connect SMART Pac III output to strike voltage pigtails
- Secure SMART Pac III module (mount or tie-wrap)
- Restore power and verify LED indicates normal operation